The X-LINK cabinet combines elegant design with a modern aesthetic, emphasising clean lines and practical details. The milled recessed edges of the frame give the dresser a sophisticated look, while the stainless steel elements on the front view ensure practical functionality.
Our furniture is crafted from premium European oak, valued for its strength, timeless beauty, and natural resilience. We hand-select and process each piece of wood in-house to ensure exceptional quality and character that lasts for generations.
Wood surfaces: Use a dry or slightly damp soft cotton cloth; avoid microfiber, which can damage oiled wood. Clean spills immediately. Use our Care package to maintain the finish and dry the surface after treatment.
Please do not install on drywall or thinner walls, as they may lack the necessary stability.
Important: Wall anchoring material (dowels, screws, etc.) is not included.
Designer
Leo Čellár is a renowned Slovak designer who has been defining our creative direction since 1997. Under his leadership, our team has established a high standard in using advanced technology to process predominantly oak wood into sophisticated design solutions. For over twenty years, Leo has excelled in the dual roles of chief designer and engineer, dedicating his work to the pursuit of enduring quality that has become the timeless hallmark of our brand.
5 years warranty
For nearly 80 years, BeOak has stood for quality. We offer comprehensive warranties to match our enduring legacy.
Made from solid oak
Every visible wooden part of this piece is solid oak — never a thin veneer over a cheaper core, and we never say "solid wood" to blur the difference. Where a piece has cabinet backs or drawer bottoms, those are oak-veneered MDF, because a wide, thin panel stays flatter that way.
Oak is hard, strong and tough, and we have specialised in it for nearly 80 years. As a natural material it lives: grain and colour vary from board to board, it responds to humidity through the seasons, and over time it takes on a warm honey patina.
Renovation & buyback option
Natural finishes can always be fully renewed, so wear never has to be permanent. Our renovation programme restores your piece to its original beauty with the same precision with which it was first made.
And when your needs change, our Guaranteed Buyback Program means we’ll buy your well-maintained BeOak piece back, restore it and give it a new home. Buyback is available two years after delivery for furniture purchased after 1 June 2022; see the full conditions.
All of our pieces are sealed with a linseed-oil & natural-wax blend (oil-wax). Here is an overview of our finishes, divided by whether they are included in the standard price or available for a surcharge:
💡 Tip: Oak naturally takes on a deeper tone over time due to UV light and oxidation. A light re-oiling every few years refreshes the colour and maintains protection.
Yes. You can order samples of all our surface finishes and upholstery fabrics here.
For larger orders and complex interior projects, we can manufacture custom products at the customer’s request.
Please consult our expert representatives to discuss your individual needs and possible solutions.
In most cases we rely on our proven standard range. Any custom design is subject to a feasibility assessment. Our broad expertise has enabled us to deliver complete interior fit-outs for both residential and commercial spaces in recent years.
Products such as chests of drawers, chairs, and TV cabinets are delivered assembled. Beds, tables, and coffee tables are delivered unassembled. However, their assembly is very simple - usually only four screws are needed (see installation). The products are packed in five-layer paper carton with special corner protection.
We are happy to arrange assembly and installation for you with our own professional team, who will take care of delivery, carrying, assembly, and of course cleaning up all the packaging and so on.
Details can be found on the Transport, delivery and installation page.
3D models are available to architects and interior designers upon login via our undefined PRO platform. You’ll find the model files directly on each product page.
SketchUp does not support FBX files by default. There are two main options to work with FBX models:
1. Using a plugin
The easiest solution is to use an importer plugin like Simlab FBX Importer, Skimp, or Transmutr. For example, after installing Simlab FBX Importer from the Extension Warehouse, you can go to Extensions → Simlab FBX Importer → Import and choose your FBX file.
2. Converting the model
If you prefer not to use a plugin, you can convert the FBX file to a SketchUp-supported format like GLB or OBJ. Several online converters allow you to do this — simply upload your FBX file, wait for the conversion, and download the result.
You can then import the converted file into SketchUp. Textures are usually preserved, and the model scale should be correct. If the model appears too large, it may have been converted using millimeters as base units — in that case, scale it down by a factor of 1000.
You May Also Like
